Filtered Beauty - Shower Purifier (Silver)

Shower Purifier includes 1 x Filtered Beauty casing, 1 x filter cartridge and 1 x tape

Filtered Beauty improves your beauty routine by eliminating hidden nasties from your shower so that you have the purest start to your self-care!

Our Shower Filters have multi-stage filtration. Not only do they filter out the nasties, but they also infuse the water with beneficial vitamins and minerals such as Zeolite, Vitamin C, and tourmaline.

Together, KDF 55, Calcium Sulfite, Activated Carbon, and High Chlorine Balls ensure MAXIMUM filtration with over 95% chlorine removal as well as reducing heavy metals, chemicals, pesticides, and other contaminants from your water.

Installation

Step 1: Flush your Filtered Beauty Shower Purifier

Hold your Filtered Beauty™ Shower Purifier under a tap and turn the water on to flush out the extra carbon particles. This may turn your water black/grey in the beginning, but don’t worry, keep flushing for approx. 20 seconds, turn it over and flush in the opposite direction.

Step 2: Remove your Existing Shower Head

Remove the existing shower head from the arm, by turning it counter clockwise. This is usually done by hand; however, you may need a wrench if your shower head is on too tight. Peel away any old tape and clean the threaded pipe.

Step 3: Apply Filtered Beauty Tape

Apply the included tape tightly around your Filtered Beauty™ Shower Purifier thread and the shower arm (approximately 3-5 times). 

Step 4: Time to Install Your Filtered Beauty Shower Purifier

Install your Filtered Beauty™ Shower Purifier onto the shower arm by turning it clockwise (hand tight), then install your shower head, also turning it clockwise (hand tight). If additional tightening is required, use a soft cloth to protect the Filtered Beauty™ Shower Purifier, and tighten with a wrench.

Handy hint when you're installing, remember, "righty tighty" and "lefty loosey"! Always turn clockwise unless stated otherwise. 

Enjoy your purest shower yet...